Please leave a border of white all the way around the
print.
Any cutting of the small quarter circles will result in the print not
coming out the correct size.
Making sure that the test print is flat, line up the 0 inch
mark to the
edge of the circle.
When measured to the edge of the opposite quarter circle, the
size
needs to be 38.5"
with no more than 1/32" of error.
Same way to measure the width of the print. This should be 18" in
width.
Please leave a border of white all the way around
the print.
Any cutting of the small quarter circles will result in the print not
coming out the correct size.
Thank you very much for your assistance!
Feel free to e-mail me of you
have any questions.